Wireless 4 Zone Receiver for 12 and 24 volt single colour led strip
In stock
Catalogue Number
WDSC-S
£16.70
Delivery Time: Next day delivery if ordered before 1.30pm
Wireless Dimmer RF receiver for single colour led strip 12 volt
4 Zone
Input/Output 12 - 24 volt
Use with a remote control for single colour strip which can be purchased seperately
Output current 10 amps (for example 12 volts x 10 amps = max 120 watts of led strip
Operatng distance up to 30 metres
Multiple receivers can be controlled by one remote .
Dc input and wired input
2 Outputs for 2 led strips.
This device is connected between single colour led strip and the secondary side of the driver
Dimensions 80x35x16mm
4 Zone
Input/Output 12 - 24 volt
Use with a remote control for single colour strip which can be purchased seperately
Output current 10 amps (for example 12 volts x 10 amps = max 120 watts of led strip
Operatng distance up to 30 metres
Multiple receivers can be controlled by one remote .
Dc input and wired input
2 Outputs for 2 led strips.
This device is connected between single colour led strip and the secondary side of the driver
Dimensions 80x35x16mm
Wireless Dimmer RF receiver for 12 and 24 volt single colour led strip . This device is connected between single colour led strip and the secondary side of the driver .It is then used with a single colour hand held remote to switch on and off or dim led strip light .Operating distance up to 30 metres.Output current 10 amps (for example 12 volts x 10 amps = max 120 watts of led strip .See diagram 2 for a typical installation.If you mislay your instructions there is an image of them .
| Delivery Time | Next day delivery if ordered before 1.30pm |
|---|---|
| Manufacturer | T-Lighting |
Write Your Own Review
Related Products
